Product Description
This handcrafted cold plunge combines a high-density polyurethane immersion tub with a selected-redwood exterior. Each unit is built in San Diego and finished using Shou Sugi Ban, a traditional Japanese wood-charring technique that highlights the grain and helps protect the wood surface.
The integrated temperature-control system includes a 1/4-horsepower chiller and a 950 GPH circulation pump. An ozone-based water-treatment system and replaceable filter support routine water maintenance.
The cold plunge arrives fully assembled and operates from a standard 110-volt household outlet. Its approximately 60-gallon capacity provides an adjustable water level based on the user’s size and preferred immersion depth.
Features
- Handcrafted in San Diego
- Selected-redwood exterior
- Traditional Shou Sugi Ban charred-wood finish
- High-density polyurethane interior tub
- Adjustable water temperature
- Programmable chiller
- 950 GPH circulation pump
- Ozone water-treatment system
- Replaceable water filter
- Approximately 60-gallon capacity
- Standard 110-volt electrical connection
- Delivered fully assembled
- Suitable for modern or rustic settings
Specifications
- Product type: Cold plunge tub
- Exterior material: Selected redwood
- Interior tub material: High-density polyurethane
- Exterior dimensions: Approximately 64 in. L × 34 in. W × 35 in. H
- Interior compartment dimensions: 36 in. L × 24 in. W × 30 in. H
- Product weight: Approximately 400 lb.
- Water capacity: Approximately 60 gal.
- Chiller: 1/4 horsepower
- Circulation-pump flow rate: 950 GPH
- Water-treatment method: Ozone generator emitting O3
- Typical power consumption: 350–500W
- Operating current: 3–5A
- Electrical requirement: 110V
- Minimum access clearance: 33 in.
- Recommended filter-replacement interval: Approximately every 1–2 months, depending on use
- Place of manufacture: San Diego, California
Because each tub is handcrafted, its exterior length and width may vary by up to 1/4 inch.
Care and Maintenance
Replace the filter approximately every one to two months, depending on frequency of use and water conditions. Follow the manufacturer’s instructions for operating the chiller, maintaining water quality, and using the ozone-treatment system safely.
Assembly
The cold plunge arrives fully assembled. Before ordering, confirm that all doors and passageways provide at least 33 inches of clearance.
The installation surface must be level and capable of supporting the combined weight of the tub, water, and user. Connect the system to a properly grounded or GFCI-protected 110-volt outlet as required by applicable electrical codes.
